50 - English
Playback
Using the Markers
1
Press the MARKER button during playback.
2
Press the OK button when the desired scene
appears.
• The number 01 is displayed and the scene is
memorized.
3
Press the œ √ button to move to the next position.
4
Press the OK button again when the desired
scene appears.
• The number 02 is displayed and the scene is
memorized.
• DVD-RAM or DVD-RW (VR mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be
displayed as many different pages, numbering is
necessary. If a disc in use is encoded with disc
Protect, Markers cannot be set or delete.
Only playback is available.
❚
Playing back a Marker
1
Press the MARKER button during playback.
2
Press the œ √ buttons to select a marked scene.
3
Press the OK or √ll button to start playing from
the selected scene.
• If you press the NEXT SKIP (√√l ) button, play-
back starts from the next marked point.
• If you press the PREVIOUS SKIP (
lœœ) button
after playing the marked point for longer than 3
seconds, playback will start from the beginning of
the current marked point. To start playback from
previous marked point, press PREVIOUS SKIP
(
lœœ) button again.
❚
Clearing a Marker
1
Press the MARKER button during playback.
2
Press the œ √ buttons to select a marked scene.
Press the CLEAR button to delete the selected
mark.
• When a marker is cleared while DVD-RAM/-RW
(VR mode) is playing, marker numbers will
change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will
automatically move ahead by one and the 8th
marker becomes the 7th.
RETURNCANCELMOVE
PLAY
Marker
N:101
RETURNCANCELMOVE
PLAY
Marker
N:201 02
RETURNOK
Marker
N:0
RETURNCANCELMOVE
PLAY
Marker
N:201 02
Marker
01 02 03 04 05 06 07 08 09 10 N:10
RETURNCANCELMOVE
Marker
PLAY
01 02 03 04 05 06 07 08 09 N:9
(VR mode)
VR25SB-2-eng 5/6/05 5:43 PM Page 50
To Next Page
Loading...
