Introduction
13
Parts and functions
NOTES:
• Some discs may not playback correctly, or chapter number, playback time, etc may not be displayed.
•You may adjust the brightness of the display window. Press CLOCK/COUNTER during power off (stand-by
mode). The brightness of the display is changed as follows whenever the button is pressed:
stand-by : dark
disappear
(power-on : bright
dark)
Display window
P
TRK
S
HDMICDVD
RW VR
PM
EXP
SLP
RAM
2
1 3
4
No. Display Description
1 Lights during video tape playback.
Video tape is temporarily stopped.
Lights during video tape recording.
P
Progressive scanning mode.
XP/SP/LP/SLP
4 DVD recording modes. XP, SP, LP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly.
SP/SLP
2 VCR recording modes. SP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly.
2 CD Appears when a Video CD/Audio CD is inserted.
CD-R Appears when a CD-R is inserted.
CD-RW Appears when a CD-RW is inserted.
DVD Appears when a DVD-Video is inserted.
DVD-R Appears when a DVD-R is inserted.
DVD-RW Appears when a DVD-RW is inserted.
DVD+R Appears when a DVD+R is inserted.
DVD+RW Appears when a DVD+RW is inserted.
RAM Appears when a DVD-RAM is inserted.
VR
Appears when a DVD-RW in VR mode is inserted. When the disc is set to video mode, VR does not appear.
Video tape is in the unit.
3 Timer recording display.
10:00 Clock display (Colon [ : ] flashes).
01:00:00 Counter display in hour/minute/second.
HDMI Appears when HDMI output is active.
TRK 2 Track number display for Video CD/Audio CD.
PM Display for afternoon (out in the morning).
L1/L1(S)/L2/L2(S)/dv
The external input channel (L1, L1(S), L2, L2(S) or DV) display.
Err Error display.
4 Lights during disc playback.
Disc playback is temporarily stopped.
Lights during DVD recording.
2K70101A_E P12-19 08`02`07, 20:4213
To Next Page
Loading...
