23
Various settings
Setting the clock / Setting the disc
You can manually set the date, year and present time
with the remote control.
Preparation:
•Turn ON the TV and set it to the video input mode.
• Select “Clock” from “General”. For the procedure, see
steps 1 to 3 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
Disc
DivX(R)
Restore
Other
Clock Settings
Date Settings
12 : 00 AM
01 / 01 / 07
Press RETURN to exit
Clock
Clock Settings
1
Select “Clock Settings” and press ENTER.
2
Press or to select hour, minute and AM/PM.
12 : 00 AM
3
Press or to set the value of the selected item.
10 : 00 AM
4
Repeat steps 2 and 3 to set the hour, minute and
AM/PM.
Then press ENTER.
Date Settings
1
Select “Date Settings” and press ENTER.
2
Press or to select month, date and year.
01 / 01 / 07
3
Press or to set the value of the selected item.
4
Repeat steps 2 and 3 to set the month, date and
year.
Then press ENTER.
This section describes disc setting.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “Disc” from “General”. For the procedure, see
steps 1 to 3 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
Disc
DivX(R)
Restore
Other
Format
New Disc Format
Finalize
Make compatible
Protect Disc
Physical Format
Format
You can format a recorded DVD-RAM/-RW/+RW.
Check the content of the disc before format. If you format
the disc, the recorded content of the disc will be erased.
1
Select “Format”, then press ENTER.
In case of DVD-RW: The screen below will appear.
Press or to select “VR” or “Video” mode, then
press ENTER.
Select the format mode.
Press RETURN to exit
Disc Setup
VR Video
In case of DVD-RAM, DVD+RW: Go to step 2.
2
The Disc Erase Notification will appear.
• When you select “Yes” and press ENTER, format
will start. The screen below will appear.
Formatting
45%
• When you select “No” and press ENTER, format
will be canceled.
NOTES:
•You cannot format Ver. 1.0 DVD-RW and DVD-R.
•You cannot format a disc if the disc is protected.
In such a case, be sure to cancel the disc protection
(see “Protect Disc” on page 25) before format.
2K70101A_E P20-28 08`02`07, 20:4323
To Next Page
Loading...
