Various settings
26
Setting the A/V Output
This section describes screen settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
• Select “Video” from “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
Audio
TV Shape
Still Mode
4:3 Letter Box
Automatic
Press RETURN to exit
Video
TV Shape
You can select the TV screen size to suit the screen
image.
Select “TV Shape” and screen size from below.
4:3 Letter Box
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it
displays a wide picture with black bands at the top
and bottom of screen.
4:3 Pan Scan
It displays a wide picture across the whole screen with
left and right edges automatically cut off.
16:9
Select this mode when connecting to a wide-screen
TV. A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the pan scan format,
it displays a 4:3 aspect ratio.
Still Mode
You can set the type of image displayed on the TV screen
when the playback of the DVD is stilled.
Select “Still Mode” and the image to be displayed from
below.
Still by Frame
The frame still is set.
Automatic
The field still or frame still is automatically selected.
(For normal use.)
Note for the field still and frame still:
(with 480i interlaced scanning mode)
• Field* still (240 lines)
Since only one field (half of the video information) is
shown on the TV screen, the picture appears rough
but does not shake.
• Frame* still (480 lines)
Tw o fields are alternatively shown on the TV screen.
The picture shakes but the resulting picture quality is
superior to the field still pictures.
Field*: A field refers to the video information in one-
half of a frame. 1 frame (screen) consists of 2
fields.
Frame*: A frame refers to the total area occupied by
each picture on the TV screen.
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “Picture” in “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
Audio
Brightness
E.B.L.
STD
Off
Press RETURN to exit
Picture
Brightness
You can control the brightness level of the image.
Select “Brightness” and the level from below.
MIN: The image becomes darker.
STD: The image is of standard brightness.
MAX: The image becomes brighter.
E.B.L.
To select the black level of playback pictures, set your
preference and monitor’s ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
This section describes audio settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
• Select “Audio” from “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
Audio
DRC
Digital Output Mode
Virtual Surround
External Audio Input
STD
PCM
Off
Stereo
Press RETURN to exit
Audio
2K70101A_E P20-28 08`02`07, 20:4326
To Next Page
Loading...
