Dubbing
66
Preparation:
•Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Remove the erase protection tab of the source video tape to prevent
the data from accidentally being erased.
• Confirm the disc space before operation.
1
Press DVD to set this unit to DVD mode.
The DVD indicator will light.
2
Press REC MODE/SPEED to select the recording mode.
• When REC MODE/SPEED is pressed each time, “SP”, “LP”,
“SLP” or “XP” is selected in this order.
• The recording mode is indicated on both the TV screen and the
display window.
•For the details of the recording mode, see page 48.
3
Press VCR and set the unit to VCR mode.
NOTE:
Confirm that the VCR indicator lights.
4
Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is waiting for re-
cording. Then the following message will appear.
5
Press or to select “Yes” and press ENTER.
Dubbing starts.
•To cancel dubbing, select “No” and press ENTER.
Confirm dubbing from VCR to DVD.
Confirmation
Yes No
During dubbing, VCR playback, DVD recording and “dub” (dub-
bing) indicator appear on the display window.
P
DVD
RW VR
XP
Video playback DVD recording
6
To stop dubbing, press STOP.
Dubbing a tape onto a disc
NOTES:
• Dubbing cannot be accomplished
when
-a copy protected tape is used.
- disc protection is set.
- disc has no recording space.
• Dubbing stops when
- the video tape is played back to
the end and stops.
- recording space becomes full.
• The videos recorded from TV pro-
grams or movies can be used only
for your personal enjoyment without
permission of the copyright holder.
You can record video or audio on a
video tape onto a disc.
2K70101A_E P64-69 08`02`07, 20:4666
To Next Page
Loading...
