Toshiba e-studio 151D - Page 78

e-STUDIO162/162D/151/151D TEST COMMAND, TROUBLE CODES 10 - 9
22 02 Maintenance preset display
(M-CNT PRESET)
[Function]
The quantity (25,000 sheets, etc.) corresponding to the code set with TC21-01 is displayed.
[Operation]
04 JAM total counter display
(JAM TTL CNT)
[Function]
The JAM total counter is displayed.
[Operation]
05 Total counter display (TTL
CNT)
[Function]
The total counter value is displayed.
[Operation]
06 Developer counter display
(DVLP CNT)
[Function]
The developer counter data is acquired and displayed on the LCD.
[Operation]
08 ADF counter display (ADF
CNT) (Disabled when set to
OC) (Executable only when
the ADF is installed.)
[Function]
The ADF counter is displayed.
[Operation]
11 FAX-related counter display
(Executable only when the
FAX is installed.)
[Function]
The FAX-related counter is displayed.
[Operation]
12 Drum counter display
(DRUM CNT)
[Function]
The drum counter is displayed.
[Operation]
Main
code
Sub
code
Contents Details of function/operation
1) Initial display
22-02 M-CNT PRESET
***,***
1) Initial display
22-04 JAM TTL CNT
***,***
1) Initial display
22-05 TTL CNT
***,***
1) Initial display
22-06 DVLP CNT
***,***
1) Initial display
22-08 ADF CNT
***,***
1) Initial display
∗
[CLEAR] key: FAX control is terminated.
2) Select 1
("xxx,xxx" is the current value.)
∗
[CLEAR] key: Returns to "1) Initial display".
2) Select 2
("xxxx: xxx. xx" is the current value.)
∗
[CLEAR] key: Returns to "1) Initial display".
SELECT COUNTER
1:PAGE 2:TIME
SEND PAGE:xxx,xxx
RECV PAGE:xxx,xxx
TX TIME:xxxx:xx.xx
RX TIME:xxxx:xx.xx
1) Initial display
22-12 DRUM CNT
***,***
e-STUDIO162_151.book 9 ページ ２００４年１２月２日 木曜日 午後９時３７分