Toshiba e-STUDIO 161 - [11] Disassembly and Assembly; 2. Optical section

11-2
e-STUDIO161 DISASSEMBLY AND ASSEMBLY
2. Optical section
Note: When disassembling or assembling the optical unit, be careful not
to touch the mirror and the reflector.
A. Copy lamp unit
Disassembly: Be sure to put No. 2/3 mirror unit to the positioning plate
(A).
Assembly: Put the notched surface of wire holder (3) downward,
tighten temporarily, and install.
Adjustment: Main scanning direction distortion balance adjustment
B. Inverter PWB for copy lamp
C. Copy lamp
No. Content
A Copy lamp unit
B Inverter PWB for copy lamp
CCopy lamp
D Lens unit
EWire
(4)
(4)
(1)
(A)
(A)
(2)
(3)
(3)
(2)
(1)
(2)
(3)
(1)
(1)
(2)
(1)
(1)
(2)
(3)
(1)
(2)
[11]DISASSEMBLY.fm 2 ページ ２００４年１月９日 金曜日 午後１時２１分