Toshiba e-STUDIO 163 - Page 82

e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE December 2005 © TOSHIBA TEC
2 - 64
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
Upper Fuser roller brush 361-0 to 8 362 <Default values of code 361
(e-STUDIO 163/203)>
Sub-code 0, 2, 3, 5, 6, 7: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Photoconductive drum 1150-0 to 8 1151 <Default values of code 1150
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Drum cleaning blade 1158-0 to 8 1159 <Default values of code 1158
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Drum separation finger 1172-0 to 8 1173 <Default values of code 1172
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Main charger grid 1174-0 to 8 1175 <Default values of code 1174
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Needle electrode 1182-0 to 8 1183 <Default values of code 1182
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Ozone filter 1198-0 to 8 1199 <Default values of code 1198
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Developer material 1200-0 to 8 1201 <Default values of code 1200
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Transfer charger wire 1214-0 to 8 1215 <Default values of code 1214
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Separation charger wire 1224-0 to 8 1225 <Default values of code 1224
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Fuser roller 1246-0 to 8 1247 <Default values of code 1246
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000