4 SETUP FLOW
34 Setup Flow for TopAccess
Setup Flow for TopAccess
TopAccess, a web-based device management utility, enables a remote management of this
equipment for users or administrators from their computers. The following functions are avail-
able in TopAccess:
Viewing or setting the information related to this equipment
Managing the address book data
Using TopAccess administrator’s functions, administrators can set up and maintain the equip-
ment remotely.
To enable TopAccess, administrators should set up the network connection between this equip-
ment and your computers over TCP/IP, and should enable the HTTP network services of this
equipment.
Setup Flow Description/Reference
Connect this equipment Connect this equipment to your network using a network cable.
Reference: Quick Start Guide for Printing Functions (this
manual)
• Chapter 3 “CONNECTING TO A COMPUTER”
P.25 “Connecting to the Network”
Set up the TCP/IP Assign the IP address, Subnet mask, and Gateway address.
Reference: Setup Guide for Printing Functions
• Chapter 5 "CONFIGURING NETWORKS (EQUIP-
MENT)"
"TCP/IP Configuration"
Set up the HTTP network service Enable the HTTP Network Server.
Reference: Setup Guide for Printing Functions
• Chapter 5 "CONFIGURING NETWORKS (EQUIP-
MENT)"
"HTTP Configuration"
To Next Page
Loading...
