5 APPENDIX
50 Troubleshooting at Network Printing Setups
This Port is Currently in Use
Problem description
The driver was either open, printing a job, or is in use by another printer or application, when you
attempted to delete it.
Corrective action
Make sure all print jobs have completed before deleting a port. If there are still problems, exit all
applications and try again. Check each driver to see if another driver is using the same port. If
so, first change the driver’s port setting and delete the port.
Problem with the Current Printer Setup
Problem description
The driver was not set up properly, possibly because the installation procedure did not complete.
Corrective action
Delete the driver and reinstall it from the distribution CD-ROM.
To Next Page
Loading...
