Walkup Screen Setting 127
5
Select the desired walkup screen with and buttons, and
then press the [ENTER] button.
Choose one among COPY, FAX or SCAN.
y “FAX” is displayed only when the Fax Kit (optional) is installed.
y “SCAN” is displayed only when the Scanner Upgrade Kit (optional) is installed.
The walkup screen is set and the screen returns to the menu in step 4.
6
Press the [CANCEL] button several times or press the [FUNCTION
CLEAR] button once.
The screen returns to the “user functions mode” main screen.
7
Press the (copy mode) button.
The screen returns to the “copy mode” main screen.
After the mode has been changed and the time of the automatic function clear has
passed, the setting becomes enabled.
WALKUP SCREEN
1.COPY
2.FAX
3.SCAN
To Next Page
Loading...
