5 CHANGING EQUIPMENT’S SETTINGS
162 Density Adjustment
5
Select the mode of the density adjustment with the and but-
tons, and then press the [ENTER] button.
AUTO: The equipment detects the density of an original and sets the appropriate
copy density automatically.
MANUAL: You can set the copy density manually.
If “AUTO” is selected, the automatic copy density mode is set and the screen returns to
the menu in step 4. Proceed to step 7.
When you select “MANUAL”, proceed to step 6.
6
Select the density with the and buttons, and then press the
[ENTER] button.
The density can be set in seven levels from “LIGHT3” (Lighter) to “DARK3” (Darker).
7
Press the [CANCEL] button several times or press the [FUNCTION
CLEAR] button once.
The screen returns to the “user functions mode” main screen.
8
Press the (copy mode) button.
The screen returns to the “copy mode” main screen.
LIGHT/DARK
1.AUTO
2.MANUAL
LIGHT/DARK
1.LIGHT3
2.LIGHT2
3.LIGHT1
To Next Page
Loading...
