Description of Each Component 27
8. USB terminal (4-pin)
With this terminal, the equipment can be connected to your PC using a commercially avail-
able USB cable.
9. Receiving tray
10. Scanning area
The data of originals transported from the Reversing Automatic Document Feeder (optional,
MR-3019)/Automatic Document Feeder (optional, MR-2017) are scanned here.
P.198 “Daily Inspection”
11. Original scale
Use this to check the size of an original placed on the original glass.
12. Platen sheet
P.198 “Daily Inspection”
To Next Page
Loading...
