Copying on Both Sides - DUPLEX - 95
4
Select the duplex copying mode, and then press the [ENTER] but-
ton.
1>2 DUPLEX: 1-sided original to 2-sided copy
2>2 DUPLEX: 2-sided original to 2-sided copy
5
Select the finishing mode, and then press the [ENTER] button.
BOOK TYPE: Open to left
TABLET TYPE: Open to top
The mode of duplex copying is set.
6
Select the other copy modes as required, and then press the
[START] button.
Copying starts.
7
Place the next original if you are using the original glass, and then
select “YES”. Repeat this procedure until all the originals are
scanned.
You can press the [START] button instead of selecting “YES”.
When all the originals have been scanned
Select “NO”.
DUPLEX
1>2 DUPLEX
1>1 SIMPLEX
2>2 DUPLEX
DUPLEX
BOOK TYPE
TABLET TYPE
Next original?
YES
NO
To Next Page
Loading...
