Zooming In/Out Copy Image 75
1
Place paper in the drawer.
2
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting LT size
You can select the desired paper size with the [DRAWER] button in the same procedure.
3
Press the APS/AMS selecting button until the AMS lamp is lit.
4
Place the original.
The equipment detects the size of the original, and then the most suitable reproduction
ratio to the copy paper size is set.
5
Select the other copy modes as required, and then press the
[START] button.
When “Change direction ORG” appears
The direction of the original placed is not correct. Press the [ENTER] button to exit the original.
Then place it by rotating 90 degrees and resume copying.
To Next Page
Loading...
