11
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
DRUM RELATED SECTION
11 - 21
[Q] Temperature/humidity sensor (S3)
[R] Toner cartridge interface PC board (CTIF)
(1) Take off the left cover.
P.2-19 "[C] Left cover"
(2) Disconnect 1 connector, remove 1 screw,
and then take off the temperature/humidity
sensor.
Fig. 11-40
(1) Take off the process unit.
P.11-17 "[N] Transfer unit"
(2) Take off the inner tray.
P.2-18 "[B] Inner tray"
(3) Disconnect 1 connector, remove 1 screw and
then take off the toner cartridge interface PC
board.
Fig. 11-41
Temperature/
Humidity sensor
Connector
Toner cartridge
interface PC board
To Next Page
Loading...
