2
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 33
(6) Take off the rear cover.
P.2-22 "[J] Rear cover"
(7) Disconnect 1 connector (optional damp
heater). Release the harness from the har-
ness clamp.
Fig. 2-49
(8) Take off the drawer of the equipment and
PFU drawer.
Fig. 2-50
(9) Remove 1 screw and take off 1 fixing bracket
on the front left side.
Fig. 2-51
To Next Page
Loading...
