2
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 35
[B-2] When PFP is installed
(13) Lift up the equipment and take off the PFU.
Fig. 2-55
(1) Take off the rear cover.
P.2-22 "[J] Rear cover"
(2) Remove 1 ground wire and 2 connectors.
Fig. 2-56
(3) Take off the equipment from the PFU.
P.2-31 "[B-1] When PFP is not installed"
(4) Take off the PFP drawer.
Fig. 2-57
To Next Page
Loading...
