Toshiba e-studio 180s - Control panel functions

Introduction
1. 3
Control panel functions
1 Displays the current status and prompts during an operation.
2 Status - Shows the status of your machine. See page 9.3.
3 Menu - Enters Menu mode and scrolls through the available menus.
4 Scroll through the options available in the selected menu.
5 OK - Confirms the selection on the display.
6 Back - Sends you back to the upper menu level.
7 Copies - Allows you to enter the number of copies.
8
Stop/Clear - Stops an operation at any time.
In Standby mode, clears/cancels the copy options, such as the resolution, the document type setting, the copy size, and the number of copies.
9 Start - Starts a job.