2 COPY FUNCTIONS
32 Basic Copy Procedure
Placing originals on the Reversing Automatic Document Feeder
1) Align all the originals.
2) Place them face up and align the side guides to the original length.
The top sheet of the originals will be scanned first.
Do not load more than 50 originals (80 g/m
2, 20 lb. Bond
) at once, and make sure the thickness of the stack of
originals does not exceed 9.5 mm regardless of their size.
To prevent long originals (A3, B4, A4-R, LD, LG, COMP, or 8K) from sliding out when, raise the paper exit
stopper. When you have finished using the stopper, lift it slightly and slide it back in.
To prevent misfeeding, do not leave originals or turn OFF/ON the equipment with originals on the Reversing
Automatic Document Feeder.
2
Press [COPY].
To Next Page
Loading...
