9
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 PAPER FEEDING SYSTEM
9 - 19
[J] 2nd transport sensor / Bypass pickup solenoid
(3) Remove 1 screw and take off the paper size
detection sensor.
Fig.9-25
(1) Take off the bypass unit
(! P.9-17 "[G] Bypass unit").
(2) Take off the bypass tray
(! P.9-18 "[H] Bypass tray").
(3) Take off the bypass feed unit
(! P.9-13 "[B] Bypass feed unit").
(4) Remove 1 screw and take off the bypass
separation roller cover
(! P.9-14 "[C] Bypass separation roller").
(5) Remove 2 screws and take off the 2nd trans-
port sensor cover.
Fig.9-26
(6) Remove 3 screws and take off the bypass
unit lower cover.
Fig.9-27
Paper size
detection sensor
2nd transport sensor cover
Bypass unit lower cover
To Next Page
Loading...
