2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 61
[F] KN-3520 (Bridge unit)
(3) Pull out the finisher while pushing the lever.
Fig. 2-99
(4) Remove 1 screw and take off the finisher
from the rail.
Note:
Be careful not to fell the finisher when mov-
ing the finisher unit only.
Fig. 2-100
(1) Turn the power OFF and unplug the power
cable.
(2) Pull out the finisher from the equipment.
(3) Remove the stopper.
Fig. 2-101
Lever
Rail
Stopper
To Next Page
Loading...
