45
5
TONER SAVE MODE
1
Press the exposure mode selector key
to select the MANUAL ( ) mode.
2
Press and hold down the exposure
mode selector key for approximately 5
seconds. The MANUAL ( ) indicator
will go out and the PHOTO ( )
indicator will begin to blink. The light
and dark indicator marked "5" will light
up, indicating the standard toner mode
is active.
3
To enter the toner save mode, press the
light ( ) key. The light and dark
indicator marked "1" will light up,
indicating the toner save mode is
selected.
4
Press the exposure mode selector key. The PHOTO ( )
indicator will stop blinking and light up steadily. The light and
dark indicator marked "3" will light up. The toner save mode is
now active.
To return to the standard mode, repeat the procedure but use the dark
( ) key to select exposure level "5" in step 3.
To Next Page
Loading...
