9
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 PAPER FEEDING SYSTEM
9 - 15
[D] Bypass feed roller
(4) Take off the cover, arbor, clutch spring and
bypass separation roller from the shaft.
Fig.9-14
(1) Take off the bypass feed unit
(! P.9-13 "[B] Bypass feed unit").
(2) Remove 2 screws and take off the upper
guide.
Fig.9-15
(3) Lift up the arm, remove 1 screw, and then
take off the bracket.
Fig.9-16
Bypass separation roller
Shaft
Cover
Arbor
Clutch spring
Upper guide
Arm
Bracket
To Next Page
Loading...
