e-STUDIO200L/202L/230/232/280/282 FUSER UNIT June 2004 © TOSHIBA TEC
13 - 12
[B] Fuser unit upper cover
[C] Separation finger
(1) Take off the fuser unit
(! P.13-11 "[A] Fuser unit").
(2) Release the harness from the harness
clamp. Remove 4 screws and take off the
fuser unit upper cover.
Fig.13-9
(1) Take off the fuser unit upper cover
(! P.13-12 "[B] Fuser unit upper cover").
(2) Remove 6 springs and take off 6 separation
fingers.
Fig.13-10
Fuser unit upper cover
Separation finger
Spring
To Next Page
Loading...
