Installing Client Software for USB Printing 31
2
Insert the Client Utilities CD-ROM into the CD-ROM drive.
y When inserting the Client Utilities CD-ROM, the installer may automatically start.
Click [Cancel] to exit the installer and continue the operation.
3
Connect the USB cable to this equipment and your computer.
y The Add New Hardware Wizard dialog box appears.
4
Select “Automatic search for a better driver (Recommended)” and
click [Next].
y It starts searching the USB driver. When the USB port driver is found in the Client
Utilities CD-ROM, it automaticaly installs the USB port driver.
If the USB port driver cannot be installed automatically, click [Back] in the displayed dia-
log box, make sure the Client Utilities CD-ROM is inserted in the CD-ROM drive, and
then click [Next] to install the USB port driver again.
5
Click [Finish].
6
Click [Next].
To Next Page
Loading...
