106
3.SETTING OF BASIC COPY MODES
3.Selecting Finishing Modes (Cont.)
3
4
Press the [FRONT STAPLE] (or [DOUBLE STAPLE] or [REAR STA-
PLE]) button.
• For the Hanging Finisher (MJ-1022), only the [FRONT STAPLE] button can be selected.
• Set other copy modes as required.
5
Press the [START] button.
If the paper quantity exceeds the maximum number of sheets that can be stapled, the Finisher automatically
enters the sort mode.
Maximum number of sheets for stapling
• For the tray loading capacity, see P.329 “2.Specifications of Options”
• Two covers of 64 to 80 g/m
2
can be added. In this case, the covers are included in the maximum num-
ber of sheets that can be stapled.
Saddle Stitch Finisher (MJ-1025)
Only plain paper (64 to 80 g/m
2
) can be used.
Hanging Finisher (MJ-1022)
Only plain paper (64 to 80 g/m
2
) can be used.
Paper size Qty.
A4, A4-R, B5, LT, LT-R 50 sheets
A3, B4, FOLIO, LD, LG,
COMP
25 sheets
Paper size Qty.
A4, A4-R, B5, LT, LT-R 30 sheets
B4, LG 20 sheets
A3, FOLIO, LD, COMP 15 sheets
To Next Page
Loading...
