283
9
Releasing a paper misfeed in the Offset Tray Unit or Job Separator Unit
(optional)
3
Remove any misfed paper.
• According to the position of the misfed paper, pull it out upward
or downward.
• upward
• downward
4
Close the exit cover, the jam releasing
cover and the automatic duplexer. Return
the bypass tray to the original position.
1
Make sure that the bypass tray and the
automatic duplexer are open, then open
the jam releasing cover.
DO NOT touch the fuser unit and the metal area around it. Since
they are very hot, you could be burned or the shock could cause
an injury to your hand in the equipment.
To Next Page
Loading...
