e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 20
(4) Remove 4 screws.
Fig. 11-37
(5) Remove 1 strap, release the harness from
the harness clamp, and take off the exhaust
fan with the duct.
Fig. 11-38
(6) Release the harness from the harness
clamp, remove the two-sided tape and take
off the exhaust fan.
Fig. 11-39
Duct
Exhaust fan
Duct
To Next Page
Loading...
