Toshiba E-STUDIO 2500C - Page 137

Scanning Remotely Using Remote Scan Driver 135
File menu:
- Page Settings — Click this menu to display the Page Settings tab.
- Image Settings — Click this menu to display the Image Settings tab.
- Scan — Click this menu to start remote scanning and acquire the image.
- Close — Click this menu to close the Remote Scan driver.
Edit menu:
- Reset Settings — Click this to reset the all settings to the factory defaults.
Devices menu:
- Discovery — Click this menu to add a new connection to this equipment in your network
for the Remote Scan driver.
 P.137 “Adding a New Device Using Network Discovery”
- Select e-STUDIO — Click this menu to change the target device when retrieving e-Filing
documents.
 P.137 “Changing the Target Device”
Help
- Help — Click this menu to display Online Help.
- About — Click this menu to display the version information.
2) Page Settings/Image Settings tab
You can set the various scan settings in each tab.
 P.135 “Page Settings Tab”
 P.136 “Image Settings Tab”
3) [Scan]
Click this to start remote scanning and acquire the image
4) [Cancel]
Click this to exit the Remote Scan driver.
5) Status Bar
This displays the communication status and the IP address of the equipment to be con-
nected.
Page Settings Tab
In the Page Settings tab, you can set the following options.
1) Original Size
Select the original size to be scanned.
- Auto — Select this to detect the original size automatically.
1
2
3
4
5
6