8 SPECIFICATIONS
144 e-STUDIO2505H/e-STUDIO2505F Specifications
e-STUDIO2505H/e-STUDIO2505F Specifications
Model name DP-2505H/DP-2505F
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method One halogen lamp
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CMOS sensor
Scanning light source LED
Resolution Writing 2400 dpi x 600 dpi (Smoothing process)
Scanning 600 dpi x 600 dpi
Acceptable originals Sheets and books
Acceptable original size Original glass: Max. A4 or LT
Automatic Document Feeder: Max. A3 or LD
Acceptable paper size Drawer A4, 16K, LT
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP,
13"LG, 8.5"SQ, 8K, 16K, 16K-R, COM10, Monarch, DL
Acceptable paper weight Drawer
64 - 80 g/m
2
(17 - 20 lb. Bond)
Bypass
64 - 80 g/m
2
(17 - 20 lb. Bond): for continuous feed
52 - 63 g/m
2
(14 lb. Bond - 16 lb. Bond), 81 - 163 g/m
2
(21 lb. Bond - 90 lb.
Index): for single feed
Warm-up time Approx. 20 seconds
First copy time (A4 or LT portrait) A4: Approx. 7.0 seconds
LT: Approx. 7.1 seconds
Continuous copy speed See P.145 “Continuous copying speed”
Multiple copying Up to 999 copies
Excluded image width Copy Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer Leading edge: 5.0±3.0 mm (0.20"±0.12")
Trailing edge: 5.0±3.0 mm (0.20"±0.12")
Both edges: 5.0±3.0 mm (0.20"±0.12")
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Storage capacity Max. 50 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply Drawer
250 sheets (80 g/m
2
, 20 lb. Bond)
Bypass
50 sheets (80 g/m
2
, 20 lb. Bond)
Loading capacity for the receiving tray
Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 9 exposure steps
Memory 512 MB
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements and power consumption
(including optional equipments)
AC 220 - 240 V±10%, 8 A (50 - 60 Hz): 1.5 kW or less
AC 120 V±10%, 12 A (60 Hz): 1.5 kW or less
Dimensions (including equipment and automatic
document feeder)
390 mm (15.4") (W) x 540 mm (21.3") (D) x 505 mm (19.9") (H)
Weight (including equipment and drum) e-STUDIO2505H: Approx.26.5 kg (58.3 lb.)
e-STUDIO2505F: Approx.27 kg (59.5 lb.)
Space occupied (equipment only) 840 mm (33.1") (W) x 540 mm (21.3") (D)
To Next Page
Loading...
