2. Installing Client Software
108 Printing Guide — Installing Client Software for Windows
4. Select “Local printer”, uncheck the “Automatically detect
and install my Plug and Play printer”, and click [Next].
5. Select “Create a new port” and select “Local Port” in the
“Type” drop down box. Then click [Next].
• The Port Name dialog box appears.
6. Enter “\\<NetBIOS Name>\print” in the field and click [OK].
Example: NetBIOS Name = MFP-00C67861
\\MFP-00C67861\print
SUPPLEMENT: You can also enter the IP address instead of the NetBIOS Name.
Example: \\10.10.70.120\print
To Next Page
Loading...
