2. Installing Client Software
114 Printing Guide — Installing Client Software for Windows
4. Select “Network printer” and click [Next].
5. Select “Connect to a printer on the Internet or on your intra-
net”, and enter “http://[IP address]:631/Print” in the “URL”
field.
• Enter the IP address of this equipment instead of [IP address].
Example: IP address = 10.10.70.105
http://10.10.70.105:631/Print
• If your network uses a DNS or WINS server, enter the printer name of this
equipment provided from DNS or WINS instead of [IP address].
Example: Print Server Name = Mfp-00c67861
http://Mfp-00c67861:631/Print
• When you connect from the Internet, enter the FQDN of this equipment pro-
vided from DNS instead of [IP address].
Example: URL = mfp_00c67861.toshiba.com
http://mfp_00c67861.toshiba.com:631/Print
NOTE: “P” for “Print” in the IPP URL must be capitalized. When you are using on Windows XP,
the IPP port can be created by entering “print” (non-capitalized) in the IPP URL, but the
print job cannot be sent to the equipment. In that case, delete the IPP port and then
create the IPP port correctly again.
SUPPLEMENTS: • If an administrator has enabled the IPP Port80 Enabled option on this equipment,
you can exclude the port number from the URL. (i.e. “http://192.168.255.48/Print”)
• If an administrator has enabled the Enable SSL option for IPP Print, you must enter
“https://[IP address]:[SSL port number]/Print” in the “URL” field.
(i.e. “https://192.168.255.48:443/Print”)
To Next Page
Loading...
