Toshiba e-studio 2822AF - Scanning the 2-Sided Originals; Selecting the Original Size

5.SCAN FUNCTIONS
150 Scan Settings
 Scanning the 2-sided originals
With the single/2-sided scan setting, you can choose whether to scan your originals on both sides.
To scan 2-sided originals automatically, the Reversing Automatic Document Feeder is required.
1
Press [SCAN].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item, and then press [OK].
 Selecting the original size
You can specify the original size.
1
Press [SCAN].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item, and then press [OK].
When an original is set on the Reversing Automatic Document Feeder (RADF) for scanning, its size is
automatically detected regardless of the settings specified in “ORIGINAL SIZE”.
Menu Functions Settings Description
SINGLE/2-SIDED
SCAN
SINGLE Scans only the front of the originals.
DUPLEX Scans both sides of the originals.
Menu Functions Settings Description
ORIGINAL SIZE A4, LT, B5, A5-R, ST-R, 16K Sets the size of your originals.
SELECT SCAN TYPE
BLACK
300dpi
SINGLE
SELECT SCAN TYPE
300dpi
SINGLE
A4