Windows Utilities
-109-
Useful Software
7
Removing a Machine
You can removes a registered machine
1 Right-click on the machine from
[Registered Device Table].
2 Select [Remove device].
3 On the confirmation screen, click on
[Yes].
Check the Status of the Machine.
Check the status and information of the machine.
1 Select the machine from the
[Registered Device Table].
2 Select the [Device Info] tab.
Memo
z When the machine is connected to the network, [Device
Status] will be displayed.
z If you want to update information, click on [Update
Device Information].
Set the Email Address
With the User Setting plugin, you can register the
machine's email address or edit it.
The following explains some of the functions.
Note
z When using the following functions, please install the User
Setting plugin.
Reference
z For how to install the plugin, please refer to "Setup" P. 108.
Icon
The meaning of each icon is as shown below.
Exporting Addresses to a File.
1 Select machine from which to export,
from the [Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [E-mail Address Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Enter the folder name and name of the
folder to be saved to, and click on
[Save].
Note
z After exporting, an edited CSV file may not restore
properly.
Importing Addresses from a File.
1 Select from which device to import, from
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [E-mail Address Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Select [Open] from [Select CSV File].
7 Select the file you want to import and
click on [Open].
8 Click on [Next].
9 Select the settings to import and click
[Import].
10 Click .
Memo
z CSV files exported by Outlook Express (Windows email and
Windows Live email) can also be restored.
Icon Details
Registers a new email
address.
Registers a new email
address group.
Saves settings on the
machine.
Deletes the selected item.
Deletes the selected item and
moves other items up.
Deletes all items.
Exports current settings to a
file.
Imports settings from a file.
Return to the main page.
Icon Details
To Next Page
Loading...
