Useful Functions for Internet Faxing and Scan To E-mail
-46-
Useful Functions for Internet Faxing and Scan To
E-mail
This section explains useful functions for the Internet fax and scan to e-mail function.
MDN is a message to notify the sender about the status after the recipient has received the document.
DSN is a message to notify the sender about the delivery status if the transmitted document has
reached the recipient.
If the machine receives a DSN request, it will not send a response.
Memo
z To enter [Admin Setup] menu, a password is necessary. The default password is "aaaaaa".
Note
z To receive response from MDN or DSN, enable the setting of MDN and DSN requests, and make email reception settings in
advance.
Reference
z For the reception setting of emails, refer to "Configuring Server to Print Files Attached to E-mails" P. 157.
Enabling MDN and DSN
Requests
Do the following procedure to request MDN and
DSN when you transmit Internet faxes and
emails.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Scanner Setup]
and then press .
6 Press the to select [E-mail Setup]
and then press .
7 Press the to select [MCF Report] and
then press .
8 Press the to select [ON] and then
press .
9 Press the until the top screen appears.
Enabling MDN Response
Do the following operation to transmit the MDN
response when the machine receives MDN
requests.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup] and
then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Scanner Setup]
and then press .
6 Press the to select [E-mail Setup]
and then press .
7 Press the to select [MDN Response]
and then press .
8 Press the to select [ON] and then
press .
9 Press the until the top screen appears.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
To Next Page
Loading...
