List of the Device Setting Menu Items
-84-
Fax Setup
Default
Settings
ID Card Copy OFF Sets whether to use the ID card copy
mode by default.
Continue Scan OFF Sets whether to use the continuous scan
mode.
Mixed Size OFF Sets whether different sized documents
are copied on each size paper as the
default.
Margin Margin OFF Sets the default settings of margins.
Margin Front Left 0 Available rage: 0 to ± 25 mm
(0.0 to 1.0inches) (1 mm/ increment)
Top
Back Left
Top
Edge Erase Setting ON Sets whether to erase the shade created
in the surrounding of 2-page spread docu-
ments as the default.
Width 2 mm
(0.1 inch)
Sets an erasing width.
Available range:2 to 50 mm
(0.1 to 2.0 inches).
Item
Factory
Default
Description
Default
Settings
Resolution Normal Sets the default setting of image quality.
Density 0 Sets the default density of images.
Scan Size A4 or Letter Sets the default scan size.
Continue Scan OFF Sets whether to use the continue scan
mode.
TTI ON Sets whether to add the sender's name to
the header of the transmitted fax.
Transmit Confirmation Report ON or OFF Sets whether to print the result of the
transmission automatically.
Memory Tx ON Sets whether to use memory transmission
(ON) or real-time transmission (OFF).
Fcode
Box
Edit/Register Confidential
Box
Box Name (NULL) Sets the name of confidential boxes. Maxi-
mum 16 characters.
Sub-Address (NULL) Sets the sub-address for your confidential
box. Maximum 20 characters.
Hold Time 0 Sets the hold time for your confidential
box. Available range: 00 to 31 days.
I.D.Code (NULL) Sets the password for your confidential
document box. Four characters from 0 to
9 (numbers only).
Bulletin Box Box Name (NULL) Sets a bulletin box name. Maximum 16
characters.
Sub-Address (NULL) Sets a sub-address for your bulletin box.
Maximum 20 characters.
Delete Deletes an Fcode box.
Item
Factory
Default
Description
To Next Page
Loading...
