e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 12
3.2.4 Scanner related adjustment
[A] Image distortion
Fig. 3-3
<Procedure>
(1) While pressing [0] and [5] simultaneously,
turn the power ON.
(2) Press [FAX] to make a copy of any image on
a sheet of A3/LD paper.
(3) Key in [308] and press the [START] button to
move the carriage to the adjustment position.
Fig. 3-4
Feeding direction
Feeding direction
Step 1
A
Step 2
C
B
D
Adjustment screw for the mirror-3 (Rear)
Carriage-2
04/09
To Next Page
Loading...
