Toshiba e-Studio 350 - Normal Display

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 40
Table 2. Connecting status of additional options at inner area of the equipment
Table 3. Relation between the status of the original tray width sensor and paper size (width).
H (= high level): Open L (= low level): Short
[9]
A Bridge unit/Job Separator/Offset Tray connection detection-
1
Refer to table 2
B Bridge unit/Job Separator/Offset Tray connection detection-
2
Refer to table 2
C Bridge unit/Job Separator/Offset Tray connection detection-
3
Refer to table 2
D- --
E- --
F- --
G- --
H- --
[0]
A- --
B- --
C- --
D- --
E- --
F- --
G- --
H- --
Bridge unit Job Separator Offset Tray
Bridge unit/Job Sepa-
rator/Offset Tray con-
nection detection-1
Normal display Highlighting display Highlighting display
Bridge unit/Job Sepa-
rator/Offset Tray con-
nection detection-2
Highlighting display Highlighting display Normal display
Bridge unit/Job Sepa-
rator/Offset Tray con-
nection detection-3
Normal display Normal display Normal display
Original tray width sensor
Paper width size
(LT series)
Paper width size
(A4 series)
TWID2S TWID1S TWID0S
H
HH
LD/LT A3/A4
HHL
-B5-R
HLH
ST-R A5-R
L
HH
LD/LT A3/A4
LHL - -
LLH
8.5" x 8.5" / LT-R / LG /
13" LG
A4-R/FOLIO
LLL
COMPUTER B4/B5
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal dis-
play
e.g.
08/04