Printing Guide — Monitoring Print Jobs with TopAccessDocMon 343
Adding new device by searching the printer automatically
1. Click [Add Device] in the Device Status tab.
• The TopAccessDocMon Network Discovery dialog box appears.
2. Click [Start Discovery] to begin the process.
• TopAccessDocMon locates the compatible printers in your network.
SUPPLEMENT: • You can quit the process by clicking [Stop Discovery].
• It may not find the device that is located in the different segment. If a device cannot
be found, find a device manually from the [Manual Selection] button.
P.345 "Adding new device by entering the printer address manually"
3. When the process is complete, the printers that have been
found are listed in the “Discovered Device” list.
To Next Page
Loading...
