SETTING NETWORK FUNCTIONS 139
3
Press the [NO AUTO IP] button in the “ADDRESS MODE” option.
4
Press the [ENTER] button.
y Returns you to the NETWORK menu.
5
Continue to another network setting if required, then press the
[APPLY NOW] button.
y The "NETWORK INITIALIZING" message is displayed and this equipment starts ini-
tializing the network interface card to apply the changes.
Setting the TCP/IP for Static IP Address
1
Press the [NETWORK] button in the ADMIN menu.
y The NETWORK menu is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU". P.107
To Next Page
Loading...
