Toshiba e-studio 3511 - Save as File

109
5
10. SAVE AS FILE
In this SAVE AS FILE function, the sent Fax data can be stored into the Share folder of the hard disk in the
main equipment or the specified PC after it is transmitted to the remote Fax device(s). You can access the
data stored in the Share folder directly from the client PC via network.
* The network administrator has to make settings for storing the Fax data to the PCs. For details, see the
[Network Administrator’s Guide].
* It is recommended to back up the data stored in the Share folder of the hard disk with the client PC via
network.
* They are stored as black-and-white data.
- To use this function for e-STUDIO350/450/200L/230/230L/280, you need to install the following options.
e-STUDIO350/450:
‘Printer kit (GM-1010) and Scanner upgrade kit (GM-3010)’ or ‘Printer/Scanner kit (GM-2010)’
e-STUDIO230/230L/280:
‘Printer kit (GM-1020) and Scanner upgrade kit (GM-3020)’ or ‘Printer/Scanner kit (GM-2020)’
e-STUDIO200L:
‘Printer kit (GM-1030) and Scanner upgrade kit (GM-3030)’ or ‘Printer/Scanner kit (GM-2030)’
- To use this function, you need the NIC board.
1
Place the original(s).
- "Setting Originals"  Page 29
2
Press the [FAX] button on the control
panel.
3
Press the [FILE] button to enter the file
menu, and then press the [SAVE AS FILE]
button.
4
Press the [FILE NAME] to enter the file
name (max. 45 letters) of the original to be
stored, and then press the [ENTER]
button.