113
6
3
Press the [JOURNAL] button.
- The journals will be output.
- If the [JOURNAL] button is pressed with a file selected, the journal
of the selected file for one transmission is output.
Error Code Table
If an error occurs during communications, an error code is indicated in the transmission journal, reception
journal or memory transmission journal.
See the following table for the remedy.
Error Code Description Remedy
0012 Original jam Clear the jammed original.
0013 Door open Firmly close the open door.
0020 Power interruption Check the power interruption report.
0030 Reset (Transmission is cancelled.)
(The transmission is terminated by the jammed
printing paper during the Direct Transmission.)
0033 Polling Error Check polling options setup (Security Code, etc.), and
check if the polling document exists.
0042 Memory full Make sure that there is sufficient memory before
making the call again.
0050 Line busy Retry communications.
0053 Security Mismatch in Relay or
Mail Box transmission
Confirm the remote party’s Security Code, system
password, and your setup.
00B0 - 00B5
00C0 - 00C4
00D0 - 00D2
00F0, 00F1
Signal Error or Line Condition
Error
Retry communications. Frequent failures may indicate
a phone line problem. If possible, move the unit to
another line and try your communications again.
00E8 HDD Error Retry communications.
To Next Page
Loading...
