147
7
4
Press the [FAX] button.
5
Press the [INITIAL SETUP] button.
6
Press the desired buttons for each item.
- Press the [Prev] or [Next] button to switch the screens.
- The screen on the right shows the default settings.
- With the monitor tone volume, you can adjust the volume level
used when the [MONITOR/PAUSE] button on the control panel is
pressed.
- With the reception completion tone volume setting, you can adjust
the volume level of the Fax reception end of print tone.
- To adjust the volume, press the [ ] or [ ] buttons. Pressing the
[ ] button raises the volume, while pressing the [ ] button lowers
it (When a tone is set to “0”, there is no sound).
To Next Page
Loading...
