Toshiba e-studio 3511 - Sending Different Width Originals

36
2.SENDING A FAX
4.SETTING THE TRANSMISSION CONDITIONS (Cont.)
2
Sending Different Width Originals
When you select the [DIFFERENT WIDTH] button in the “ORIGINAL” of the transmission condition, the
originals with different width can be sent at a time using Reversing Automatic Document Feeder.
Available combinations of the original size are as follows. (Not available for the combination of LT format
and A/B format)
- LT format: LD, LT, COMP, LG, LT-R
- A/B format: A3, A4, B4, B5, A4-R, FOLIO
1
Adjust the tray guide to the widest
original size, and then align the original
against the front side.
2
Press the [FAX] button on the control
panel.
3
Press the [ADDRESS] button to enter the
address menu, and then press the
[OPTION] button.
4
Press the [DIFFERENT WIDTH] button.
- Set the other transmission condition as required.
See "Setting the Transmission Conditions"  Page 34
5
Press the [ENTER] button to complete the
setting.
6
Specify the remote Fax and press the
[START] button.