68
4.CHECKING AND CANCELING THE COMMUNICATIONS
1.CHECKING TRANSMISSION RESULTS (Cont.)
4
Checking Communication Status (LOG)
You can check the following information of the communication status (log) in the list on the touch panel.
- File number
- Receiver or sender
- Accepted date
- Number of originals
- Communication result
OK: Transmission or reception succeeded.
4-digit error code: Transmission or reception failed. "Error Code Table" Page 113
4 jobs are listed on each screen (page). The job display for 40 jobs (10 pages) are available.
The setting can be changed to display the list for 120 jobs (30 pages).
"Setting the (transmission/reception) Journal Output and its Number" Page 116
1
Press the [JOB STATUS] button on the
control panel.
2
Press the [LOG] button to enter the log
menu, and then press the [SEND] or
[RECEIVE] button.
To Next Page
Loading...
