Installing Client Software for Novell Printing 139
When the NetWare has been set up for the NDS or NDPS mode, browse the NDS tree
and context, and double-click the queue for the equipment.
y The Printers dialog box appears.
2
Click [Yes].
y The Add Printer Wizard dialog box appears.
3
Select whether printing MS-DOS-based programs and click [Next].
y When using the NetWare in NDPS mode and the printer drivers for each Operating
System are installed to a NDPS broker, the printer driver is automatically installed.
Skip to Step 10.
y Unless using the NetWare in NDPS mode and printer drivers for each Operating Sys-
tem are installed to a NDPS broker, the Add Printer Wizard dialog box appears. Con-
tinue to the next step.
4
Click [Have Disk...].
y The Install From Disk dialog box appears.
To Next Page
Loading...
