111
3
Number of punch holes and available paper sizes
Since the number of punch holes and the distance between the holes vary depending on the country/
region, purchase a hole punch unit that meets your requirements. (For details, consult your service techni-
cian.)
Manual stapling (MJ-1101 only)
The manual stapling function which enables you to use the staple function without making copies is avail-
able in the optional Finisher (Type B) (MJ-1101). This function is useful when copies are made without sta-
pling being set or when you want to staple originals.
A: Stapling position lamps C: Manual-stapling lamp
B: [Stapling position] button D: [Manual-stapling] button
1
Press the [Manual-stapling] button.
The shutter in the paper exit area is opened.
Number of punch holes
and hole diameter
Available paper sizes
MJ-6004E
(Japan and most of Europe)
2 holes
(6.5 mm dia.)
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
MJ-6004N
(North America)
2/3 holes switchable
(8.0 mm dia.)
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
MJ-6004F
(France)
4 holes
(6.5 mm dia.; 80 mm pitch)
A3, A4, LD, LT
MJ-6004S
(Sweden)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT-R, COMP
MJ-6101E
(Japan and most of Europe)
2 holes
(6.5 mm dia.)
A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT,
LT-R, COMP, A3, A4
MJ-6101N
(North America)
2/3 holes switchable
(8.0 mm dia.)
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
MJ-6101F
(France)
4 holes
(6.5 mm dia.; 80 mm pitch)
A3, A4, LD, LT
MJ-6101S
(Sweden)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
A C DB
To Next Page
Loading...
