351
12
Job Separator
Offset Tray
Hole Punch Unit (MJ-6004)
Model name MJ-5004
Acceptable paper size A3, A4, A4-R, B4, B5, B5-R, A5-R, FOLIO
Acceptable paper weight
Upper stacker: 64-105 g/m
2
Lower stacker: 50-209 g/m
2
Loading Capacity Upper stacker: 25 mm (150 sheets)
Lower stacker: 40 mm (250 sheets)
*1
*1. Values in parentheses is the number of 80 g/m
2
sheets.
Power source Supplied from the multifunctional digital systems
Dimensions 498 mm (W) x 415 mm (D) x 153 mm (H)
Weight Approx. 3.3 kg
Model name MJ-5005
Acceptable paper size A3, A4, A4-R, B4, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable paper weight
50-209 g/m
2
Loading Capacity
39 mm (250 sheets)
*1
*1. Values in parentheses is the number of 80 g/m
2
sheets.
Shift Amount Approx. 30 mm
Power source Supplied from the multifunctional digital systems
Dimensions 500 mm (W) x 415 mm (D) x 169 mm (H)
Weight Approx. 3.5 kg
Model name MJ-6004
Acceptable paper size A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable paper weight
64 - 209 g/m
2
(OHP film and specially treated paper are not available.)
Dimensions 112 mm (W) x 617 mm (D) x 378 mm (H)
Weight Approx. 9 kg
Number of punching holes and hole diameter Available paper size
Japan and most of
Europe (MJ-6004E)
2 holes
(6.5 mm dia.)
A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LD, LG, LT, LT-R, COMP
North America
(MJ-6004N)
2/3 holes switchable
(8.0 mm dia.)
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
France (MJ-6004F) 4 holes
(6.5 mm dia.; 80 mm pitch)
A3, A4, LD, LT
Sweden (MJ-6004S) 4 holes
(6.5 mm dia.; 70 mm and 21 mm pitch)
A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LD, LG, LT-R, COMP
To Next Page
Loading...
