15
During Maintenance or Inspection
Warning
- NEVER attempt to repair, disassemble or modify the multifunctional digital systems by yourself. You could
cause a fire or get an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal parts of the
multifunctional digital systems.
- ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could cause
a fire and give you an electric shock due to the heat released by electric leakage.
- DO NOT let liquids such as water and oil get into the system when cleaning the floor. This could cause a
fire and give you an electric shock.
Caution
- DO NOT touch the stapling area. The actual needle point could cause you personal injury. "Saddle-stitch
Finisher (MJ-1024)" Page 275
Other Points
- DO NOT use such solvents as thinner or alcohol when cleaning the surface of the multifunctional digital
systems.
- This could warp the shape of the surface or leave it discoloured.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
To Next Page
Loading...
